First, the role of screws
The roof tile is usually fixed on the keel of the house with screws, which can firmly fix the tile on the keel to prevent the roof from moving or collapsing due to natural disasters such as wind and rain. At the same time, the screws can also connect the large tile to the keel closely, enhancing the stability of the roof. Therefore, the screw on the roof tile is an important component to ensure family safety.
Second, screw installation method
1. Before installation, prepare tools, such as wrenches, electric drills, etc., to ensure the quality of installation.
2. Place the large tile on the roof keel and determine the position.
3. Use the electric drill to drill holes in the reserved holes of the tile, and the depth of the holes should ensure that the screws can be fully inserted.
4. Install the screw into the hole and tighten it using a wrench.
5. Check whether the connection between the tile and the keel is stable and reliable.
Three, common problems and solutions
1. How to prevent screws from loosening?
If the screw is loose, it should be tightened with a wrench in time. In addition, it is recommended to check regularly to avoid safety problems caused by screw loosening.
2. How to deal with screw breakage?
If the screw breaks, it should be replaced with a new screw in time, and check whether the large tile is damaged.
3. How to deal with screw hole wear?
If the screw hole is worn, it can be repaired with glue or other tools, but it must be noted that the repaired hole position must be consistent with the original screw hole position.
In short, the role of the screws on the roof tile can not be ignored, and the correct installation and regular inspection can ensure the safety of the family.
